304 STAINLESS STEEL PIPE
304 stainless steel pipe detail
304 STAINLESS STEEL PIPE ASTM A312 TP304 SEAMLESS, ASME B36.19M
- LENGTH: 6METERS FIXED LENGTH OR BY ORDER
- ANNEALING AND PICKLING
- ENDS: PLAIN ENDS, BEVELED ENDS
- TOLERANCE OF THICKNESS: +10%/-5%
- PACKING: ENDS WITH PLASTIC CAPS, THEN BUNDLES OR WOODEN CASES
- MARKING: LOGO,SMLS,ASTM A312 TP304 1/2” SCH10 6METERS LOT NO.(***) ET/UT
304 STAINLESS STEEL PIPE
stainless steel tubings Testing:
A. 100% PMI
B. HYDROSTATIC TEST (HOLD TIME=8S)/ET/UT
C. HEAT TREATMENT: 1900°F(1040℃ ), IN RAPIDLY COOLED BY WATER FOR 2MINS.
D. MATERIAL CONFORMS TO NACE MR-0175
E. INTERGRANULAR CORROSION TEST AS PER ASTM A262 PRACTIVE ’E’
F. FLATENING TEST: ASTM A999/999M
CHEMICAL COMPOSITION (%)
C | Si | Mn | P | S | Cr | Ni | Fe |
≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00-20.00 | 8.00-11.00 | Balance |
MECHANICAL PROPERTIES
Test Item | Y.S.(Mpa)Rp0.2 | T.S.(Mpa) | E.l.(%)In 2 In | |
Min | 205 | 515 | 35 |
STAINLESS STEEL PIPE SIZE
Available diameter: 1/8”~24”
Available thickness: SCH10S,SCH40, SCH XS, SCH 60,SCH80S,SCH120,SCH1160,SCH XXS
Available length: S.R.L to 12Meters
STAINLESS STEEL PIPE FROM OUR STOCK
DN Diameter: DN6, DN8, DN10, DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN90, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400
Nominal pipe size: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch, 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch.
Schedule thickness: SCH10, SCH40, SCH40S, SCH60, SCH80, SCH80S, SCH100, SCH120, SCH160, SCH XXS, SCH STD
CUSTOM 304 ROUND PIPE
Custom 304 stainless steel round seamless pipe available from INOKS, special size with any length, but your qualtity sure be over 10tons for each size.
And of course, not only 304 round pipe, but also 304 rectangular pipe and 304 square pipe.
if you need above service, please contact us. we are 100% sure our products can meet your need.
