316 STAINLESS STEEL TUBING ASTM A269 TP304L16L
316 STAINLESS STEEL TUBING SEAMLESS ASTM/ASME A269 TP316L
316 STAINLESS STEEL TUBING , SEAMLESS TUBES ASTM A269 TP316L
316 STAINLESS STEEL TUBING, SEAMLESS TUBES ASTM A269/A269M TP316L ASTM A632
2INCH,BWG14 DIAMETER 50.8,THICKNESS 2.11MM
LENGTH: 6METERS FIXED LENGTH OR BY ORDER
ANNEALING AND PICKLING/BRIGHT ANNEALING
ENDS: PLAIN ENDS
TOLERANCE OF THICKNESS: +10%/-0%
PACKING: ENDS WITH PLASTIC CAPS, WOODEN CASES
MARKING: LOGO,SMLS,ASTM A269 TP316L 50.8*2.11MM 6METERS LOT NO.(***) ET/UT
COLD DRAW STAINLESS STEEL SEAMLESS TUBES
TESTING:
- 100% PMI
- HYDROSTATIC TEST (HOLD TIME=8S)/ET/UT
- HEAT TREATMENT: 1900°F(1040℃ ), IN RAPIDLY COOLED BY WATER FOR 2MINS.
- MATERIAL CONFORMS TO NACE MR-0175
- INTERGRANULAR CORROSION TEST AS PER ASTM A262 PRACTIVE ’E’
- FLATENING TEST
CHEMICAL COMPOSITION (%)
C | Si | Mn | P | S | Cr | Ni | Fe | Mo |
≤0.035 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00-18.00 | 10.00-11.00 | Balance | 2.00-3.00 |
MECHANICAL PROPERTIES
Test Item | Y.S.(Mpa)Rp0.2 | T.S.(Mpa) | E.l.(%)In 2 In | |
Min | 170 | 485 | 35 |
AVAILABLE SIZE
Available diameter: 1/2”-3”
Available thickness: BWG16,BWG14,BWG12,BWG10
Available length: fixed length as order
Bright annealed seamless tubes
stainless steel seamless tubes tp316l
Nominal pipe size: 1/4inch, 1/2inch, 3/4inch, 1inch, 1-1/2inch, 2inch, 2-1/2inch, 3inch, 4inch
BWG thickness: BWG16, BWG14, BWG12, BWG10
Length: Above 28meters
Food grade stainless steel tube
Food grade stainless steel tube is mainly used in food, beverage, wine, bioengineering and other production equipment and assembly line. It is mainly aimed at the surface finish, oil prohibition and passivation layer of stainless steel tube;
1. Surface finish: the internal and external surface of the steel pipe is polished to make the surface of the steel pipe bright; that is to say, the mirror surface. The main purpose is to prevent the fluid material from forming wall in the pipe, which is easy to pollute and form blockage after a long time.
2. Passivation layer: after polishing, the steel pipe should be immersed in the passivation pool, and the surface of the steel tube should be oxidized to form a passivation layer with acid passivation solution, so as to achieve the anti-corrosion effect of the steel tube.
3. Oil prohibition degree: after passivation, the oil prohibition cleaning shall be carried out to remove the oil stain on the steel pipe surface. After completion, it needs to be inspected by grease analyzer. It mainly prevents the oil pollution of the tube wall itself to the fluid substance in the tube.