317L STAINLESS STEEL PIPE
317L STAINLESS STEEL PIPE DETAILS
317L STAINLESS STEEL PIPE
317L STAINLESS STEEL PIPE, SEAMLESS PIPES ASTM A312 TP317L, ASME B36.19M
- LENGTH: 6METERS FIXED LENGTH OR BY ORDER
- ANNEALING AND PICKLING
- ENDS: PLAIN ENDS, BEVELED ENDS
- TOLERANCE OF THICKNESS: +10%/-5%
- PACKING: ENDS WITH PLASTIC CAPS, THEN BUNDLES OR WOODEN CASES
- MARKING: LOGO,SMLS,ASTM A312 TP317L 1/2” SCH10 6METERS LOT NO.(***) ET/UT
COLD DRAW STAINLESS STEEL SEAMLESS PIPES
TESTING:
A. 100% PMI
B. HYDROSTATIC TEST (HOLD TIME=8S)/ET/UT
C. HEAT TREATMENT: 1900°F(1040℃ ), IN RAPIDLY COOLED BY WATER FOR 2MINS.
D. MATERIAL CONFORMS TO NACE MR-0175
E. INTERGRANULAR CORROSION TEST AS PER ASTM A262 PRACTIVE ’E’
F. FLATENING TEST: ASTM A999/999M
CHEMICAL COMPOSITION (%)
C | Si | Mn | P | S | Cr | Ni | Fe | Mo |
≤0.035 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | Balance | 3.00-4.00 |
MECHANICAL PROPERTIES
Test Item | Y.S.(Mpa)Rp0.2 | T.S.(Mpa) | E.l.(%)In 2 In | |
Min | 205 | 515 | 35 |
AVAILABLE SIZE
Available diameter: 1/8”~24”
Available thickness: SCH10S,SCH40, SCH XS, SCH 60,SCH80S,SCH120,SCH1160,SCH XXS
Available length: S.R.L to 12Meters
AVAILABLE PIPES FROM OUR STOCK
stainless steel seamless pipe tp317L
DN Diameter: DN6, DN8, DN10, DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN90, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400
Nominal pipe size: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch, 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch.
Schedule thickness: SCH10, SCH40, SCH40S, SCH60, SCH80, SCH80S, SCH100, SCH120, SCH160, SCH XXS, SCH STD
CUSTOM TP317L ROUND PIPE
Custom TP317L stainless steel round pipe available from INOKS, special size with any length, but your qualtity sure be over 10tons for each size.
And of course, not only TP317L round pipe, but also TP317L Srectangular pipe and TP317L square pipe.
if you need above service, please contact us. we are 100% sure our products can meet your need.
