SEAMLESS PIPES ASTM B407 Incoloy 800H UNS N08811
SEAMLESS PIPES ASTM B407 Incoloy 800H UNS N08811



SEAMLESS PIPES ASTM B407 Incoloy 800H UNS N08811
INCOLOY 800h SEAMLESS PIPES ASTM B407 Incoloy800H UNS N08811
LENGTH: 6METERS FIXED LENGTH OR BY ORDER
ANNEALING AND PICKLING
ENDS: PLAIN ENDS, BEVELED ENDS
TOLERANCE OF THICKNESS: +10%/-5%
PACKING: ENDS WITH PLASTIC CAPS, THEN BUNDLES OR WOODEN CASES
MARKING: LOGO,SMLS,
ASTM B407 Incoloy800H UNS N08811 OD THCKNESS 6METERS LOT NO.(***) ET/UT
SEAMLESS NICKEL ALLOY PIPES ASTM B407 Incoloy800H UNS N08811
TESTING:
- 100% PMI
- HYDROSTATIC TEST (HOLD TIME=8S)/ET/UT
- HEAT TREATMENT: 1100℃, IN RAPIDLY COOLED BY WATER FOR 2MINS.
- MATERIAL CONFORMS TO NACE MR-0175
- INTERGRANULAR CORROSION TEST AS PER ASTM A262 PRACTIVE ’E’
- TEST METHODS: B829
CHEMICAL COMPOSITION (%)
C | Si | Mn | P | S | Cr | Ni | Fe | Ti | Co | Al |
0.015-0.10 | ≤1.00 | ≤1.50 | ≤0.03 | ≤0.015 | 19.0-23.0 | 30.0-35.0 | Balance | 0.15-0.60 | ≤0.75 | 0.15-0.60 |
MECHANICAL PROPERTIES
Test Item | Y.S.(Mpa)Rp0.2 | T.S.(Mpa) | E.l.(%)In 2 In | |
Min | 210 | 500 | 35 |
APPLICATION AREA:
- Nitric acid condenser – resistant to nitric acid corrosion
- Steam heating tube – good mechanical properties
- Heating element tube – good mechanical properties
For applications up to 500 ° C, the alloy supply is annealed.
AVAILABLE SIZES
Available diameter: 1/2”~12”
Available thickness: SCH10S,SCH40, SCH XS, SCH 60,SCH80S,SCH120,SCH1160,SCH XXS
Available length: S.R.L to 12Meters
Incoloy800H UNS N08811 has the following characteristics
- Excellent corrosion resistance in extremely high temperature aqueous media up to 500 ° C
- Very good resistance to stress corrosion
- Very good processability
Metallographic structure of Incoloy 800H
800H is a face-centered cubic lattice structure. The extremely low carbon content and increased Ti:C ratio increase structural stability and maximum sensitization resistance as well as intergranular corrosion resistance. Low temperature annealing at around 950 °C ensures a fine grain structure.
Corrosion resistance of Incoloy 800H
800H is resistant to many corrosive media. Its high nickel content gives it excellent resistance to stress corrosion cracking in aqueous corrosion conditions. The high chromium content gives it better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric acid and organic acid corrosion, but has limited corrosion resistance in sulfuric acid and hydrochloric acid. In addition to pitting corrosion in halides, it has good corrosion resistance in oxidizing and non-oxidizing salts. It also has good corrosion resistance in water, steam and a mixture of steam, air and carbon dioxide.
AVAILABLE PIPES FROM OUR STOCK
Seamless pipes Incoloy800H UNS N08811
DN Diameter: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN90, DN100, DN125, DN150, DN200
Nominal pipe size: 1/2inch, 3/4inch, 1inch, 1-1/4inch, 1-1/2inch, 2inch, 2-1/2inch, 3inch, 4inch, 5inch, 6inch, 8inch
Schedule thickness: SCH10, SCH40, SCH40S, SCH60, SCH80, SCH80S, SCH100, SCH120, SCH160, SCH XXS, SCH STD