INCONEL 600 PIPE

INCONEL 600 PIPE SEAMLESS PIPES ASTM B167 UNS N06600

INCONEL 600 PIPE
SEAMLESS PIPES ASTM B167 UNS N06600​
SEAMLESS PIPES ASTM B167 INCONEL 600

INCONEL 600 PIPE SEAMLESS ASTM B167 INCONEL600 UNS N06600

INCONEL 600 PIPE , SEAMLESS NICKEL ALLOY PIPES

ASTM B167 INCONEL600 UNS N06600

LENGTH: 6METERS FIXED LENGTH OR BY ORDER

ANNEALING AND PICKLING

ENDS: PLAIN ENDS, BEVELED ENDS

TOLERANCE OF THICKNESS: +10%/-5%

PACKING: ENDS WITH PLASTIC CAPS, THEN BUNDLES OR WOODEN CASES

MARKING: LOGO,SMLS, ASTM B167 INCONEL600 UNS N06600  OD THCKNESS 6METERS LOT NO.(***) ET/UT

INCONEL 600 PIPE SEAMLESS NICKEL ALLOY PIPES ASTM B167 INCONEL600 UNS N06600

TESTING:

  1. 100% PMI
  2. HYDROSTATIC TEST (HOLD TIME=8S)/ET/UT
  3. HEAT TREATMENT: 1100℃, IN RAPIDLY COOLED BY WATER FOR 2MINS.
  4. MATERIAL CONFORMS TO NACE MR-0175
  5. INTERGRANULAR CORROSION TEST AS PER ASTM A262 PRACTIVE ’E’
  6. TEST METHODS: B829 E8 E112 E1473

CHEMICAL COMPOSITION (%)

C

Si

Mn

P

S

Cr

Ni

Fe

Ti

Cu

Al

≤0.015

≤0.50

≤1.00

≤0.03

≤0.015

14.0-17.0

≥72.00

6.0-10.0

0.15-0.60

≤0.50

0.15-0.60

 

INCONEL 600 PIPE MECHANICAL PROPERTIES

Test Item

Y.S.(Mpa)Rp0.2

T.S.(Mpa)

E.l.(%)In 2 In

 
 

Min

180

500

35

 

 

APPLICATION AREA:

  1. Thermowell in an erosive atmosphere
  2. Vinyl chloride monomer production: anti-chlorine gas, hydrogen chloride, oxidation and carbonization corrosion
  3. Uranium oxidation to hexafluoride: anti-hydrogen fluoride corrosion
  4. The production and use of corrosive alkali metals, especially in the use of sulfides
  5. Using titanium gas to make titanium dioxide
  6. Production of organic or inorganic chlorides and fluorides: resistance to chlorine and fluorine gases
  7. Nuclear reactor
  8. The retort and components in the heat treatment furnace, especially in carbonized and nitriding atmospheres
  9. Catalytic regenerators in petrochemical production are recommended for use in applications above 700 °C to achieve a long service life.

AVAILABLE SIZES

Available diameter: 1/2”~12”

Available thickness: SCH10S,SCH40, SCH XS, SCH 60,SCH80S,SCH120,SCH1160,SCH XXS

Available length: S.R.L to 12Meters

Inconel 600 alloy has the following characteristics

  1. Has good resistance to reduction, oxidation and nitriding medium corrosion
  2. Excellent resistance to stress corrosion cracking at room temperature and high temperature
  3. Has good resistance to dry chlorine and hydrogen chloride gas corrosion
  4. Excellent mechanical properties at subzero, room temperature and high temperature
  5. It has good creep rupture strength and is recommended for working environment above 700 °C.

Metallographic structure of the Inconel 600

Inconel 600 is a face-centered cubic lattice structure.

Corrosion resistance of Inconel 600

Alloy 600 is corrosion resistant to a variety of corrosive media. The chromium composition gives the alloy better corrosion resistance under oxidizing conditions than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 201, low carbon). At the same time, the higher nickel content makes the alloy have good corrosion resistance in reducing conditions and alkaline solution, and can effectively prevent chlorine-iron stress corrosion cracking. Alloy 600 has good corrosion resistance in organic acids such as acetic acid, acetic acid, formic acid, and stearic acid, and has moderate corrosion resistance in inorganic acids. It has excellent corrosion resistance in high purity water used in primary and secondary recycling in nuclear reactors. The outstanding performance of the 600 is resistant to corrosion by dry chlorine and hydrogen chloride at temperatures up to 650 °C. At high temperatures, the annealed and solution treated alloys have excellent resistance to oxidative spalling and high strength in air. The alloy is also resistant to ammonia and nitriding, carburizing atmospheres, but when the redox conditions alternate, the alloy will be corroded by some oxidizing medium (such as green death liquid)

AVAILABLE PIPES FROM OUR STOCK

Seamless pipes Inconel 600
DN Diameter: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN90, DN100, DN125, DN150, DN200
Nominal pipe size: 1/2inch, 3/4inch, 1inch, 1-1/4inch, 1-1/2inch, 2inch, 2-1/2inch, 3inch, 4inch, 5inch, 6inch, 8inch
Schedule thickness: SCH10, SCH40, SCH40S, SCH60, SCH80, SCH80S, SCH100, SCH120, SCH160, SCH XXS, SCH STD

Please send your message, we will reply you within 24 hours