INCONEL 601 TUBE
INCONEL 601 TUBE SEAMLESS ASTM B167 UNS N06601
INCONEL 601 TUBE SEAMLESS ASTM B167 INCONEL601 UNS N06601
INCONEL 601 TUBE SEAMLESS ASTM B167 INCONEL601 UNS N06601
LENGTH: 6METERS FIXED LENGTH OR BY ORDER
ANNEALING AND PICKLING
ENDS: PLAIN ENDS, BEVELED ENDS
TOLERANCE OF THICKNESS: +10%/-5%
PACKING: ENDS WITH PLASTIC CAPS, THEN BUNDLES OR WOODEN CASES
MARKING: LOGO,SMLS, ASTM B167 INCONEL600 UNS N06600 OD THCKNESS 6METERS LOT NO.(***) ET/UT
INCONEL 601 TUBE SEAMLESS NICKEL ALLOY PIPES ASTM B167 INCONEL601 UNS N06601
TESTING:
- 100% PMI
- HYDROSTATIC TEST (HOLD TIME=8S)/ET/UT
- HEAT TREATMENT: 1100℃, IN RAPIDLY COOLED BY WATER FOR 2MINS.
- MATERIAL CONFORMS TO NACE MR-0175
- INTERGRANULAR CORROSION TEST AS PER ASTM A262 PRACTIVE ’E’
- TEST METHODS: B829 E8 E112 E1473
CHEMICAL COMPOSITION (%)
C | Si | Mn | P | S | Cr | Ni | Fe | Cu | Al |
≤0.01 | ≤0.50 | ≤1.50 | ≤0.02 | ≤0.015 | 21.0-25.0 | 58.0-63.0 | Balance | ≤0.50 | 1.0-1.70 |
INCONEL 601 TUBE MECHANICAL PROPERTIES
Test Item | Y.S.(Mpa)Rp0.2 | T.S.(Mpa) | E.l.(%)In 2 In | |
Min | 240 | 600 | 30 |
APPLICATION AREA:
- Pallets, baskets and fixtures for heat treatment plants.
- Wire strand annealing and radiant tubes, high speed gas burners, wire mesh belts in industrial furnaces.
- Isolation tanks in ammonia reforming and catalytic support grids in the manufacture of nitric acid.
- Exhaust system components
- Combustion chamber of solid waste incinerator
- Pipe support and soot treatment components
- Exhaust gas detoxification system components
- Oxygen reheater
AVAILABLE SIZES
Available diameter: 1/2”~12”
Available thickness: SCH10S,SCH40, SCH XS, SCH 60,SCH80S,SCH120,SCH1160,SCH XXS
Available length: S.R.L to 12Meters
Inconel 601 alloy has the following characteristics
- Excellent oxidation resistance at high temperatures
- Very good anti-carbonization
- Good oxidation resistance sulfur-containing atmosphere
- Good mechanical properties at room temperature and high temperature
- Good resistance to stress corrosion cracking Due to the control of carbon content and grain size, 601 has a high creep rupture strength, so 601 is recommended in the field above 500 °C
Metallographic structure of the Inconel 601
601 is a face-centered cubic lattice structure.
Corrosion resistance of Inconel 601
An important property of Alloy 601 is its ability to resist oxidation at temperatures up to 1180 °C. Even under very harsh conditions, such as heating and cooling cycles, 601 can form a dense oxide film with high resistance to spalling. 601 has good resistance to carbonization. Due to its high chromium and aluminum content, 601 has excellent oxidation resistance in high temperature sulfur-containing atmospheres.
AVAILABLE PIPES FROM OUR STOCK
Seamless pipes Inconel 601
DN Diameter: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN90, DN100, DN125, DN150, DN200
Nominal pipe size: 1/2inch, 3/4inch, 1inch, 1-1/4inch, 1-1/2inch, 2inch, 2-1/2inch, 3inch, 4inch, 5inch, 6inch, 8inch
Schedule thickness: SCH10, SCH40, SCH40S, SCH60, SCH80, SCH80S, SCH100, SCH120, SCH160, SCH XXS, SCH STD